展商风采 | 南星科技（广东）有限公司

企业介绍

展位号：E2-001   

南星科技（广东）有限公司       

South Star Technology (Guangdong) Co., Ltd.

产品与服务

Our Story

我们的故事

South Star Glass Limited was founded in 2000 and has been providing quality glass products for different markets.

南星玻璃有限公司成立于2000年，始终致力于为全球市场提供优质玻璃产品。In 2013, ourfactory with 14,000m2 was set up in Dongguan Qingxi Town.

2013年，我们在东莞清溪镇建立了首个占地14,000平方米的玻璃加工厂。

In order to deliver more sophisticatedand diversified products, we moved to the present factory located in Foshan SanShui District with an area of 110,000m2together with more than 200 professional employees in 2019.

2019年，为满足更高端、多元化的市场需求，我们将生产基地迁至佛山市三水区，新工厂占地面积达110,000平方米，拥有200余名专业技术人员。

Now, Star Glass is one of the well-equipped independent glass processing plants in South China. We supply high quality products not only in China(including the Hong Kong Special Administrative Region and the Macao Special Administrative Region), but are also exported to Singapore, Australia and  North America.

如今，南星玻璃已成为华南地区设备最先进、产能最高的独立玻璃加工企业之一。我们的产品不仅覆盖中国（包括：香港特区、澳门特区），更远销新加坡、澳大利亚及北美地区。

Company Policy

公司政策

South Star adheres to the company culture of customer focused and people oriented, and provides solutions from design to manufacture, ensure good quality and after-sale service.

南星秉承“以客户为中心，以人为本”的企业文化，提供从设计到制造的一站式解决方案，并确保卓越品质与完善的售后服务。

Environmental环保承诺

We make commitment to environmental protection:

我们始终践行环保责任：

Any waste/remaining glass will be collected for recycling

全面回收废弃玻璃材料

A high quality and compatible national standard circulating water treatment system is installed for water wastage handling

采用符合国家标准的循环水处理系统

A renewable energy generation system was put into service in 2021.

2021年正式启用可再生能源发电系统

Sustainability

可持续发展

BVG Glazing Retrofit

建筑真空玻璃改造

Retrofit is a secondary glazing with independent BVG system added to the room side of existing window or curtain wall glass panels.

BVG改造技术通过在现有窗户或幕墙玻璃内侧加装独立BVG系统，实现二次玻璃升级

Sustainable Retrofit - There is no need to remove existing windows and thus no wastage is going to landfill.

零拆除：保留原有结构，杜绝建筑垃圾

BVG reflects solar radiation from outdoor and prevents heat convection & conduction from outer glass to indoor

高效隔热：反射太阳辐射，阻断外部热量传导

BVG improves the thermal, acoustic, safety and security performance of existing windows.

性能全面提升：显著增强隔热、隔音、安全及节能效果

Vacuum Insulated Glazing

南星真空玻璃

Redefine Standard for Safety, Energy Saving and Occupants’ Comfort 

—重新定义安全、节能、舒适新标准

South Star VacStar utilizes special sealing materials and sealing processes to construct a 0.2mm thick vacuum layer between two layers of glass, with a vacuum degree of 10^-4Pa.

南星真空玻璃利用特殊的封接材料和封接工艺，在两层平板玻璃之间构建一层0.2mm厚的真空层，真空度为10^-4Pa。

The presence of a vacuum layer between the glass virtually blocks all heat conduction and convection as well as sound transmission. The Low-E re-flective coating can reduce more than 95% of solar thermal radiation.

由于玻璃之间存在真空层，热传导和对流基本不存在，声音无法传播，平板玻璃上的Low-E反射层又可以反射95%以上的热辐射。

Hence, VacStar has much better thermal and acoustic performance than common insulating glass unit in the market.

因此真空玻璃拥有超强的隔热保温、隔声降噪的功能，效果远超目前市场上常用的中空玻璃。

Excellent Insulating Performance

极佳隔热保温性能

U-value is below 0.5 (even lower than high performance triple glazed insulating glass)

传热系数U值在0.5以下（比最高性能的三玻二腔中空玻璃还低）。

Sound Reduction

靜音降噪

VacStar enables houses in the city center as quiet as sitting inside a library.

真空玻璃静音降噪，使市中心的房子犹如图书馆般安静。

Condensation Free

防止结露

No frost or condensation even at -60°C, exceeding highest visual requirement of windows and doors in buildings.

零下60°C不结霜、无凝露，完美匹配建筑门窗的视觉要求。

High Durability

超长使用寿命

The service life of VacStar exceeds 25 years. By using soft metal edge sealing, VacStar overcomes the failure problem caused by brittle sealing materials especially in the environment with large temperature difference between the inner and outer glass surfaces. Moreover, with built-in high efficiency getter material, our VacStar can sustain a high level of vacuum for a very long time.

VacStar预期使用寿命>25年。采用精密焊接工艺和柔性金属焊料，配备高效吸气剂，可长时间维持真空腔的真空度在合理区间内，保证真空玻璃的性能。

Superior Safety Performance

安全性能佳

Using low-temperature sealing technology, fully tempered glass does not re-anneal during vacuum assembly process, ensuring maximum safety. Meeting the tempered glass requirements of the GB15763 Standard; Surface stress>90MPa; Glass granularity≥40 pieces.

采用全钢化玻璃原片、低温封接技术生产，不破坏玻璃的钢化性能。满足国标GB15763钢化玻璃要求；表面应力 >90Mpa；玻璃颗粒度≥40粒（50*50mm）。

Environmentally Adaptable

环境任意转变

The vacuum chamber does not expand or contract in different atmospheric pressure and will not be affected in different regions or altitude.

真空腔体不会因为大气压环境而出现膨胀或收缩现象，其使用不受地域、海拔的影响。

Slim Structure

结构轻薄

As thin as 6.2mm thick with weight only at 15Kg/m2, VacStar significantly 

reduces the costs in window frame system, storage, and logistics.

薄至6.2ｍｍ厚，仅重15Kg/m2，大幅降低构件、储存、物流费用。

Glaspedia BIPV

南星光伏发电玻璃

Glaspedia BIPV is a laminated glass with CdTe thin film as the core of the power generation materials. This kind of BIPV has no pollution nor radiation, and can be customized to different light transmittance and outlook patterns.

南星光伏发电玻璃是采用CdTe薄膜发电核心的夹层玻璃，无污染、零辐射，支持透光率与外观图案定制化设计。

Bird -Safe Solutions

鸟类安全玻璃

Highly durable with weather resistant digital ceramic inks is the ideal solution for creating bird-safe glass. Reducing reflection and glare, bird-safe glass providesa visual barrier for birds to detect the panels. Together with unique digital printing advantages, they allow for more complicatedesign patterns while adhering to the standardized guidelines of the “2x4” rule which has been proven to significantly reduce the number of bird collisions.

采用高度耐用且具备耐候性的数字陶瓷油墨技术，是打造防鸟撞玻璃的理想解决方案。防鸟撞玻璃通过降低反射与眩光，为鸟类提供视觉警示屏障，使其能够清晰辨识玻璃面板。结合独特的数码打印优势，该技术不仅能实现更复杂精美的图案设计，同时严格遵循已被验证可显著降低鸟类碰撞率的“2×4”标准化规则指南。

Quality Assurance

质量保障

Osprey 10

钢化变形和应力斑检测设备

Our glass materials are inspected by Osprey 10 which is the high-performance system that meets and exceeds the requirements of leading architects and clients. Osprey also provides mandated distortion and anisotropy measurements.

我们的玻璃材料均通过Osprey 10检测系统进行检验。该系统是一款高性能检测设备，不仅满足更能超越顶尖建筑师与客户对玻璃性能的严苛要求，同时提供强制性的钢化变形与各向异性检测。

LineScanner

表面缺陷检测设备

Our glass products are inspected by the LineScanner for quality assurance. It scansour products with extremely precision for all defects in quality and dimension.

此外，我们采用LineScanner表面缺陷检测仪对玻璃产品进行全面质量把控。该设备能以极高精度扫描所有质量缺陷与尺寸偏差，确保每一件产品均符合行业高标准。

本文刊登的材料（包括文字、图片、视频等），未经许可不得复制。如有疑问请与后台工作人员联系。

我们已尽责核对所提供信息，但对信息的及时性和准确性不作任何担保。涉及信息、产品或服务(包括第三方信息、产品或服务)的材料均按照展商提供进行格式编辑，我们不提供任何担保，不保证其质量满意、适合特定用途或不侵权，不保证其兼容性、安全性及准确性。材料中链接指向其他网址，旨在方便您了解更多信息。不表示我们认可该网址。对于链接网址的内容，我们不承担任何责任。注册活动时，您个人资料的搜集、处理和使用将按照相关数据保护规定办理。